Available Variants:
- Single Compartment - 25 X 25 X 282 MM
- Two Mould Compartment - 25 X 25 X 282 MM
- Three Mould Compartment - 25 X 25 X 282 MM
- Four Mould Compartment - 25 X 25 X 282 MM
- Single Compartment - 75 X 75 X 285 MM
- Single Compartment - 75 X 75 X 300 MM
Common Details:
- Supplied with smooth reference Point Pins.
- Effective Gauge Length 250mm ± 2mm.
- IS:10086-2021 is applicable to the variants where specified.
Variants Details:
1. Single Compartment - 25 X 25 X 282 MM:
- Supplied with a pair of smooth reference Point Pins, as per IS:10086-2021, IS: 4031, ASTM C 151.
2. Two Mould Compartment - 25 X 25 X 282 MM:
- Supplied with 2 pair of smooth reference Point Pins, as per IS:10086-2021, IS: 4031, ASTM C 151.
- Two Mould compartment.
3. Three Mould Compartment - 25 X 25 X 282 MM:
Compliance Standards:
- IS 4031, IS:10086-2021, ASTM C 227, BS 1881
Applications:
- Shrinkage Bar Mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity.
Details:
- Made of Mild steel Material.
- Has accurately machined faces.
- Tight fittings and firmly held together when assembled.
- 25mm x 25mm x 282mm Effective gauge length (250 mm effective length is the distance between two inner most reference points available within the mould.)
- Three compartments assembled on angle base plate.
- Supplied complete with base plate and stainless steel smooth referenced points.
4. Four Mould Compartment - 25 X 25 X 282 MM:
- Supplied with 4 pair of smooth reference Point Pins, as per IS:10086-2021, IS: 4031, ASTM C 151.
- Effective Gauge Length 250mm ± 2mm, Four Mould compartment.
5. Single Compartment - 75 X 75 X 285 MM:
- SHRINKAGE BAR MOULD - 75 X 75 X 285 MM SINGLE COMPARTMENT
6. Single Compartment - 75 X 75 X 300 MM:
- AS PER IS:516:PART 6(2020), For measurement of drying shrinkage., IS:10086-2021
- Length measuring device, Gauge plug and all other accessories required for the drying shrinkage test are to be purchased separately.