Construction:
- All Inner & Outer parts of Oven will be fabricated from CRCA 18 SWG Sheet Material & it will be suitably reinforce with angles.
- Oven will be insulated with 100MM Thick Ceramic wool insulation all sides of the Oven.
- Oven will have one door at front side. Door will also be insulated with 100MM thick Ceramic wool insulation.
- Door will be provided with Special Gasket. Door will be provided with Special locking system. Sturdy plates and hinges For frictionless moving Arrangements
Heating: 12 Kw-440 Volt- Three-phases:
- Heating element will be made of NI-CR Wire Refectory type. It will be located at inside the Oven on Both sides.
Silent Features Of Heaters:
- Heaters will be low watts & black heat type design. Heaters terminals will be brought outside the Oven body for safety.
- Maximum temperature attained by the Oven will be 400 DEG C. and will be Controlled by Digital temperature Controller
- The heaters will be placed in such way that each heater will be accessible individually. Heaters will be designed in low watts &black heat type design so no radiation heating inside the Oven & amp; VERY MUCH ACCURATE TEMPERATURE
Air Circulation:
- Air inside the Oven will be circulated by a dynamically balanced fan which will be driven by ½ H.P. 1440 RPM vertical totally enclosed fan cooled motor suitable for Operation on 230 Volts 3 phase 50 cycles A.C. supply
- The fan will suck air from center of Oven and forced on both sides so that the air Flow will Be passing over the materials.
Control Panel: 12 Kw-440 Volt- Three-phases:
Control Panel Will Consist Of Following Items
A) Ampere meter for current indication 3 Nos.
B) Volt meter 1 Nos.
C) Digital Temp. controller 1 Nos.
D) Indicating lamps
E) Set of Contactors
F) Toggle switch for Heater ON/OFF
G) Toggle switch for Motor ON/OFF
H) Extra Safety Thermostat.
Safety Features:
- Heater and blower are provided with interlock .Unless blower starts, Heater will not start.
Paint:
- Inner Heat Resistance Silver Paint & Outside