Applications:
- Drying, baking, wax, heat treatment and bacterial culture in one chamber
Salient Features:
- Drying, Sterilization and Incubation work can be completed through use of single instrument
- Twin model comprises of upper chamber & lower chamber
- Upper chamber works as an incubator while the lower chamber works as oven
- Both inner chamber & exterior body are fabricated from Stainless Steel S.S. - 304 grade material
- Both upper & lower chambers are filled with 65-75mm high density Glass wool insulation on all sides to avoid thermal leakage
- Oven & incubator - both are fitted with forced air circulation blower and heating elements such that uniform temperature distribution is achieved throughout the working chamber
- Quality Heating elements ensures long service life & minimum heat loss within the chamber
- Electric Motor located at the back side of unit, which is protected with safety cover to avoid accident
- Fitted with special heavy duty Stainless steel lock and door hinges with spring-roller mechanism
- Adjustable Shelves to place the Test Samples/Glass wares of varying dimensions
- Adjustable air ventilation mounted on sides of the chamber
- Unit mounted on castor wheels for easy movement.
- Internal circuit wiring as per international norms
- Aesthetic external appearance
- Complete with pilot indicating lamps, 2 meter cord wire and power plug.
- Operation on 220/230 Volt, 50 Hz, Single phase, AC Supply
- Supplied complete with IQ OQ DQ documents.
Air Circulation:
- Temperature is maintained by a quiet running blower for better air circulation throughout the chamber. Forced air circulated vertically down and re-circulated throughout the chamber for uniform temperature distribution.
Trays for samples:
- Trays of the incubator will be manufactured from strong Stainless steel rods - strong enough to with-stand heavy load of test specimens, which should be equally distributed among trays.
- Such trays will also facilitate better air circulation.
- The distance between trays will be 15-20 centimeters.
Safety Features:
- High temperature safety cut off (Thermostat)
- Electrical overload safety (Fuse 10 Amperes)
Pre installation mandatory requirement : (Guarantee void in case of non compliance):
- An operator shall maintain Room temperature around machine preferably at 25 °C with air conditioning system or shall arrange for a well ventilated room with exhaust fan. However, surrounding temperature should not exceed 30 °C .
- Stabilized Input Voltage of 230 Volt, 50 Hz, 20 Amps, AC Supply must be available for error less performance of the instrument. Use of Servo Controlled Stabilizer is recommended.
